Universal Milling

2,3,4,5,6 and 8 flutes are available and as an option cutting edges can be either chamfered, corner radiused, sharp edged or ball nosed.

RTC-CARBIDE Milling Tools have longer lifetime with our improved coating developed according to material type and machining method. 

Suitable for:
Steel Stainless
Steel Cast Iron

Hard Material Milling

From rough milling to semi-finished operations on hardened steel (<55 Hrc) shall be used as the first choice.

From finish operations on hardened steel (<65Hrc)  advised to be used.

Suitable for:
Hardened Steel
Profile Milling

Aluminium Milling

1,2 and 3 flutes are available and as an option cutting edges can be manufactured either chamfered, corner radiused, sharp edged or ball nosed. 

It is designed for high chip removal thanks to its special form. With the high polishing applied, the adhesion feature on non-ferrous materials (aluminium, brass etc.) is also minimized. 

Suitable for:
Non-ferrous materials 
Aluminium
Brass Graphite

Stainless Steel and
Titanium Milling

2 and 4 flutes featuring special channel and cutting geometries are available and as an option cutting edges can be manufactured either chamfered, corner radiused, sharp edged or ball nosed.

Suitable for slot and side milling. With the help of two-core geometry it reduces vibrations to minimum. 

Suitable for: 
Stainless Steel
Titanium Alloy
Super Alloy